Another Jetting Question

So they dont get muddled and lost in the directory, please post your tuning questions here.

Moderator: Moderators

Post Reply
User avatar
Miles
zxr400 oc member
zxr400 oc member
Posts: 498
Joined: Wed Apr 30, 2008 11:00 pm
My Bike: ZXR 400 L3
Location: Bangor, Northern Ireland

Another Jetting Question

Post by Miles »

Hello guys, anyone give me some advice on what size jet's they think work best with the following set-up

zxr 400 l3 (UK bike) - K&N Air filter
Dynojjet Stage one (96 jets in it now, needles on second notch plus two washers)
No-Name aftermarket Can with baffle out

I followed the dynojet instructions ie: after-market can and K&N filter needs

At the moment it is running very rich, plugs are black. I've fixed the air mixture screws using a colourtune and it helped but not sure if the bike is running at it's best. Just havn't got the money for a dyno run

Any thoughts?
User avatar
jake
zxr400 oc member
zxr400 oc member
Posts: 1016
Joined: Mon Oct 02, 2006 10:03 pm
My Bike: tomos moped
Location: wirral

Re: Another Jetting Question

Post by jake »

I would put the standard needles back in, or the dynojets on the leanest setting at least.
that will no doubt sort it mate. can wont make that much difference, neither will the k/n filter that much.
you could try 98 mains maybee.

oh, and set the idle mix thingy screws back to standard
Post Reply