Another Jetting Question
Posted: Tue Sep 08, 2009 11:23 pm
Hello guys, anyone give me some advice on what size jet's they think work best with the following set-up
zxr 400 l3 (UK bike) - K&N Air filter
Dynojjet Stage one (96 jets in it now, needles on second notch plus two washers)
No-Name aftermarket Can with baffle out
I followed the dynojet instructions ie: after-market can and K&N filter needs
At the moment it is running very rich, plugs are black. I've fixed the air mixture screws using a colourtune and it helped but not sure if the bike is running at it's best. Just havn't got the money for a dyno run
Any thoughts?
zxr 400 l3 (UK bike) - K&N Air filter
Dynojjet Stage one (96 jets in it now, needles on second notch plus two washers)
No-Name aftermarket Can with baffle out
I followed the dynojet instructions ie: after-market can and K&N filter needs
At the moment it is running very rich, plugs are black. I've fixed the air mixture screws using a colourtune and it helped but not sure if the bike is running at it's best. Just havn't got the money for a dyno run
Any thoughts?