Jetting help please
Posted: Sun Aug 16, 2009 10:08 pm
Ex track bike, supposed to have reprofiled cams.
Std. airbor with extra holes drilled in it. Std. airfilter - K&N still in box.
Full Micron system.
Was running fine - 9 years ago! - when I stripped it, now back together and fitted with the Micron system. Prev. std. system and aftermarket can.
Carbs cleaned out and fine but now wont rev clean or out.
Just bought some 32mm carbs as the ones on it are 30mm, please advise jet / needle etc. so I can get in the ball park before it goes to the dyno.
Cheers
Gareth
Std. airbor with extra holes drilled in it. Std. airfilter - K&N still in box.
Full Micron system.
Was running fine - 9 years ago! - when I stripped it, now back together and fitted with the Micron system. Prev. std. system and aftermarket can.
Carbs cleaned out and fine but now wont rev clean or out.
Just bought some 32mm carbs as the ones on it are 30mm, please advise jet / needle etc. so I can get in the ball park before it goes to the dyno.
Cheers
Gareth