loobman chainoiler feedback
Moderator: Moderators
- masterofinsanity
- Site Admin
- Posts: 8102
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
loobman chainoiler feedback
could those that have bought the chainoilers please leave their feedback here so i can forward to the chap that makes/supplies them.Your comments good and bad are appreciated!
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- zxr_oli
- zxr400 oc member
- Posts: 319
- Joined: Sat Jun 02, 2007 10:42 am
- My Bike: Daytona 675
- Location: East Sussex
Re: loobman chainoiler feedback
Will do as soon as i find time to fit it ![pmsl :pmsl](./images/smilies/Laie_67.gif)
![pmsl :pmsl](./images/smilies/Laie_67.gif)
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: loobman chainoiler feedback
Instructions are to long winded for me.
Illustration is OK though, but needs part ID to help stop reading instructions
Wire cradle for feed head is a bitch to fit
Everything else fairly straight forward.
It works
But having teething problems with mine - thread to follow.
Once i get it sorted it will be a good buy at the price.
Top Tips:
1) Use thicker oil than Engine oil.
2) Place bottle where you can squeeze it while riding or you'll end up with a pool of oil on the ground before heading off.
3) get the feed head as close as possible to the sprocket making the feed legs as short as possible.
Illustration is OK though, but needs part ID to help stop reading instructions
![:smt005](./images/smilies/005.gif)
Wire cradle for feed head is a bitch to fit
![:smt009](./images/smilies/009.gif)
Everything else fairly straight forward.
It works
![:smt001](./images/smilies/001.gif)
Once i get it sorted it will be a good buy at the price.
Top Tips:
1) Use thicker oil than Engine oil.
2) Place bottle where you can squeeze it while riding or you'll end up with a pool of oil on the ground before heading off.
3) get the feed head as close as possible to the sprocket making the feed legs as short as possible.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: loobman chainoiler feedback
UPDATE:
So it's been on a while doing it's job and initial reaction was
" Oh fook, look at that fling on my rear wheel "
Glad to report i haven't had any scary moments with it being there but my chicken strips are huge
So i stopped squeezing it and waited for the chain to go just about dry before doing another , that has never come - seems to be an auto lube !!
What I reckon is the bottle is heating up and cooling down and this is delivering a small amount of oil into the system which is
Out today working on the bike and there is still some fling on the tyre but not puddles. The chain is the cleanest i have ever seen it and wet, the sprocket is clean which no thick gunge from spray lube and it was a doddle to clean everything off. Some parts cleaner on a rag and a wipe and it was done
Still very happy with it.
![Image](http://i493.photobucket.com/albums/rr296/Unobtanium2/loobman2/th_Teeth-1.jpg)
![Image](http://i493.photobucket.com/albums/rr296/Unobtanium2/loobman2/th_Sprocket2.jpg)
MM!
So it's been on a while doing it's job and initial reaction was
" Oh fook, look at that fling on my rear wheel "
Glad to report i haven't had any scary moments with it being there but my chicken strips are huge
![:smt003](./images/smilies/003.gif)
So i stopped squeezing it and waited for the chain to go just about dry before doing another , that has never come - seems to be an auto lube !!
![:smt017](./images/smilies/017.gif)
What I reckon is the bottle is heating up and cooling down and this is delivering a small amount of oil into the system which is
![:smt004](./images/smilies/004.gif)
Out today working on the bike and there is still some fling on the tyre but not puddles. The chain is the cleanest i have ever seen it and wet, the sprocket is clean which no thick gunge from spray lube and it was a doddle to clean everything off. Some parts cleaner on a rag and a wipe and it was done
![:smt001](./images/smilies/001.gif)
Still very happy with it.
![Image](http://i493.photobucket.com/albums/rr296/Unobtanium2/loobman2/th_Teeth-1.jpg)
![Image](http://i493.photobucket.com/albums/rr296/Unobtanium2/loobman2/th_Sprocket2.jpg)
MM!
Last edited by Mori Man on Mon Dec 01, 2008 10:32 am, edited 2 times in total.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- masterofinsanity
- Site Admin
- Posts: 8102
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: loobman chainoiler feedback
cool, i'm guessing no-one else has fitted theirs yet?
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- lindaloo
- zxr400 oc member
- Posts: 429
- Joined: Mon Nov 06, 2006 10:05 am
- My Bike: ZXR 400
- Location: rotherham
Re: loobman chainoiler feedback
no mines still not fitted....altho it has been mentioned very recently....so could be this weekend....instructions looked long winded to me too.... looked at it and thought sod it that can wait lmao
people say that before you die, your whole life flashes before your eyes... make sure its worth watching !! ![Wink ;-)](./images/smilies/icon_wink.gif)
zzr 600
zxr400
http://golfnutlady.spaces.live.com/photos/
![Wink ;-)](./images/smilies/icon_wink.gif)
zzr 600
zxr400
http://golfnutlady.spaces.live.com/photos/
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: loobman chainoiler feedback
lindaloo wrote:no mines still not fitted....
![shocking shocking](./images/smilies/icon_e_surprised.gif)
I've just removed mine as all the pipes have gone solid with the climate here - going to source some silicone based tubing to help it stay flexible.
Chain still looks good but back to using a rattle can for the moment
![:smt012](./images/smilies/012.gif)
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly