Pistons were a nightmare to get out i managed to pump one caliper with the brake, The other caliper wouldnt pump out as i ran out of fluid i think.
After various attempts of trying to get them out with compressed air and other things they had to get pulled out with molegrips !
These are the pistons now cleaned
![Image](http://img39.imageshack.us/img39/5033/dsc0034edit.jpg)
![Image](http://img694.imageshack.us/img694/9644/dsc0036editm.jpg)
![Image](http://img33.imageshack.us/img33/8647/dsc0037edit.jpg)
Picture number 3 this piston is what im worrying about although i have been told this shouldnt be a problem as its not going to be near the seals
![Image](http://img402.imageshack.us/img402/2640/dsc0038edit.jpg)
![Image](http://img707.imageshack.us/img707/4160/dsc0039gp.jpg)
Iv got a new seal kit ordered and some red rubber grease to rebuild the brakes.
Question is are these pistons ok ?
Do i need to rebuild my master cylinder ?
And new pads i was looking at brembo ones anyone used these before ?
Thanks