Hello everybody,
I bought front radial master cylinder (Brembo From KTM RC8/Ducati 848 Evo), but I don't know what Brake lines buy.
The standard lines fitting? The banjos that degrees should have?
Someone has a picture of his radial m / c with brake lines?
Thanks and sorry for my english.
Brake lines for Brembo Radial Front M/C
Moderator: Moderators
- sirio5
- Posts: 8
- Joined: Tue May 01, 2012 11:43 pm
- My Bike: ZXR 400 L8
- Location: Italy - Florence
- Contact:
Brake lines for Brembo Radial Front M/C
My bike : ZXR 400 L8 + Mass Gp1 Carbon Exhaust + Dynojet stage 1 + K&N Air Filter
Italy ZXR400 Forum : http://zxr400italia.forumfree.it/
Italy ZXR400 Forum : http://zxr400italia.forumfree.it/
-
- Posts: 77
- Joined: Thu Jan 03, 2013 1:26 am
- My Bike: ZXR 400 L9
Re: Brake lines for Brembo Radial Front M/C
I wouldn't use standard lines with a Brembo M/C.
You deffo want stainless braided lines.
With the Banjos, HEL and Goodridge sell them individually.
Buy a braided kit from either of them and see if it fits.
If not, buy some Banjos of the correct angle and fit those to the line.
You deffo want stainless braided lines.
With the Banjos, HEL and Goodridge sell them individually.
Buy a braided kit from either of them and see if it fits.
If not, buy some Banjos of the correct angle and fit those to the line.