Change end can ?

Moderator: Moderators

Post Reply
JulianWerner
Posts: 51
Joined: Fri Oct 19, 2012 4:05 am
My Bike: Kawasaki ZX4R 1991 (L)
Location: Bergen, Norway
Contact:

Change end can ?

Post by JulianWerner »

Hi guys.

I have the standard downpipes, and end can.

I want to get some more noise from this bike, does the PipewerX end can fit original pipes ? :smt003
If not, does anyone know about slip on cans for the original pipes ?
* Aprilia RS 125 (2000 modell / 2 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
User avatar
CaNsA
zxr400 oc member
zxr400 oc member
Posts: 1741
Joined: Sat Nov 29, 2008 4:02 pm
My Bike: ZX6R F1
Location: Liverpool

Re: Change end can ?

Post by CaNsA »

The original pipes aren't slip on.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.

:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
JulianWerner
Posts: 51
Joined: Fri Oct 19, 2012 4:05 am
My Bike: Kawasaki ZX4R 1991 (L)
Location: Bergen, Norway
Contact:

Re: Change end can ?

Post by JulianWerner »

:smt012

Is one of these recommended then ?

http://viewitem.eim.ebay.no/Kawasaki-ZX ... 90498/item

http://viewitem.eim.ebay.no/ZXR400-ZXR- ... 16965/item

Maybe this one ?

http://viewitem.eim.ebay.no/Kawasaki-ZX ... 13650/item

EDIT:

I read a little bit about it, and it seems to me that " Micron " system is the best downpipes ?
Do you know where i could get one ?

Thanks so much for replying :smt003
* Aprilia RS 125 (2000 modell / 2 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: Change end can ?

Post by banner001 »

your second link (http://viewitem.eim.ebay.no/ZXR400-ZXR- ... 16965/item) will allow you to use 3-bolt bolt-on cans, or 52mm slipons, the delkavic exhausts are replicas of the originals and wont allow you to use anything other than a 3-bolt exhaust (with the same bolt-spacing as the original can).

micron are a ~60+mm outlet and are generally seen as a "race" exhaust, if you can get one, congratulations, they are getting rarer :D
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
JulianWerner
Posts: 51
Joined: Fri Oct 19, 2012 4:05 am
My Bike: Kawasaki ZX4R 1991 (L)
Location: Bergen, Norway
Contact:

Re: Change end can ?

Post by JulianWerner »

I think i will go for the SandySpare pipes.

Do some of you guys know if PipewerX cans will fit these pipes?

If not maybe another silencer ?
* Aprilia RS 125 (2000 modell / 2 Stroke)
* Kawasaki ZXR 400 (1991 / 4 Stroke)
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: Change end can ?

Post by banner001 »

best bet is email pipewerx, i think its a 3-bolt fitting, but if not, just ask them what diameter slip-on it will fit.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
ross46
Restricted
Restricted
Posts: 825
Joined: Fri Aug 26, 2011 9:31 pm
My Bike: zxr 400 l6

Re: Change end can ?

Post by ross46 »

yeah the pipewerx can do fit the original downpipes, i had a chat with one of the guys at nec
Post Reply