OK, I'm stripping my bike right down. I've removed the swingarm pivot bolt flanged nut, but the bolt wont come out.
I think the answer is no, but is the frame threaded where the nut is?
I'm guessing it should come out with some heat and tapping...but it's very stubborn.
Cheers!
Swingarm pivot bolt.
Moderator: Moderators
- banner001
- Track day God
- Posts: 2591
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Swingarm pivot bolt.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- zxr400 oc member
- Posts: 148
- Joined: Mon Jan 12, 2009 12:04 pm
- My Bike: ZXR400L5
- Location: Newport Shropshire
Re: Swingarm pivot bolt.
viewtopic.php?f=124&t=8001
I had a similar problem and the above link might help you resolve the problem. I have a spare bolt should you need it.
I had a similar problem and the above link might help you resolve the problem. I have a spare bolt should you need it.
- Dominik
- Posts: 110
- Joined: Tue Oct 07, 2014 11:05 am
- My Bike: Zxr 400 L3
- Location: Trier - Germany
Re: Swingarm pivot bolt.
The frame isn´t threaded there so you can apply as much force as you can to on the axle. If you can´t get it out with a hammer you could try a press somewhere for example with a big clamp...
Zxr 400 SL - 130kg