zxrworld shim collection

Moderator: Moderators

User avatar
jamesgoodfella
zxr400 oc member
zxr400 oc member
Posts: 35
Joined: Thu Dec 03, 2015 11:26 am
My Bike: ZXR400 H1 + CB350K2
Location: Bristol - BS16
Contact:

Re: zxrworld shim collection

Post by jamesgoodfella »

Is this still a thing?
I've got the following if anyone wants to swap with me
2.25 - 2
2.30 - 1
2.35 - 3
2.40 - 1
2.60 - 1
2.80 - 2
2.85 - 4
2.90 - 1
masterofinsanity wrote:or use a Duplo brick :smt002
bikemonkey
Posts: 35
Joined: Thu Feb 02, 2017 12:39 pm
My Bike: Honda NC30

Re: zxrworld shim collection

Post by bikemonkey »

Also need some shims!

I need:

2.90 x2
2.95 x3
3.00 x2

Does anyone have these?
Nc30 track hack
Zxr400 L4 project road bike
Xj900 motorway muncher
GeorgeMoroz
Posts: 10
Joined: Wed Apr 12, 2017 2:21 pm
My Bike: ZXR 400 L3

Re: zxrworld shim collection

Post by GeorgeMoroz »

I'm doing my clearances this week, I do already have a collection of shims if anyone doesn't mind swapping once I know what I need? Cheers
RSVR
Posts: 17
Joined: Wed Aug 02, 2017 4:37 pm
My Bike: Zxr400 race, cbr600F3 rac

Re: zxrworld shim collection

Post by RSVR »

Gents

I need the following shims

2.91 x2
2.97 X1
2.98 x2
3.35 X1
3.15 x4

For exchange

2.95 x2
3.02 X1
3.19 x4
3.39 X1

Trying to get this done asap as this is for ace bike

Many thanks
M
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: zxrworld shim collection

Post by banner001 »

Any 7.48mm Shim will fit the engine, i dont think anyone really does the shim swap anymore, if you are buying more than 7 shims, this place is the cheapest i know of.

https://www.ebay.co.uk/itm/Honda-CRF-15 ... SwstxU2NiC
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: zxrworld shim collection

Post by banner001 »

3.3+mm shims are quite big for this bike, have you had the cam-profile re-ground?

also the place i quoted does 0.05mm increments (fairly standard, it it possible to find 0.025mm increments as well if you look hard)

so you need:
2.90 x2
2.95 x1
3.00 x2
3.35 x1
3.15 x4
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
RSVR
Posts: 17
Joined: Wed Aug 02, 2017 4:37 pm
My Bike: Zxr400 race, cbr600F3 rac

Re: zxrworld shim collection

Post by RSVR »

Cheers fella for the info.

I know Kent Cams with manufacture to your specification be it slightly more expensive !!

Regards
Post Reply