Tyga conversions question?

Moderator: Moderators

Post Reply
nathboiii
Posts: 3
Joined: Sun Mar 29, 2009 12:30 pm
My Bike: zxr400 L9

Tyga conversions question?

Post by nathboiii »

Ok well the tyga website has a complete bodykit for the zxr250 so i was just wondering if this kit would fit the 400 L? Cheers guysss
User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8101
Joined: Thu Aug 29, 2002 12:36 am
My Bike: Aprilia Tuono Fighter
Location: England
Contact:

Re: Tyga conversions question?

Post by masterofinsanity »

i would certainly like to try it!
You do not have the required permissions to view the files attached to this post.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: Tyga conversions question?

Post by RedexRobB »

If youve got the patience and time you can fit anything i reckon. chrissBB fitted a ZX6 bodykit to his.
hoddie
Posts: 23
Joined: Wed Mar 14, 2012 9:43 am
My Bike: In between bikes

Re: Tyga conversions question?

Post by hoddie »

Did anyone go anywhere with this?
Norwegian400L1
Posts: 14
Joined: Fri Jun 01, 2018 11:55 am
My Bike: ZXR400 L1
Location: Norway

Re: Tyga conversions question?

Post by Norwegian400L1 »

Hi!

How did this work out? Love that rear fairing! ( in my opinion the only body figure that the 400L misses)

Found a step-by-step fitting modul on the zxr250 subframe here: http://tyga-performance.com/images/00ps ... ninjas.pdf

Can it be done on the 400, or does det 250 subframe fit/adjust to the 400L mainframe?

Has anyone tried something like that? I've seen a lot of questions on previous posts, but no feedback/pics on results..

thanks :)
For those in disspair - I'm new to this :-D
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: Tyga conversions question?

Post by banner001 »

its a 9 year old post...doubtful it came to anything...

ive got both a zxr250 and a 400, the 250 is quite narrow, and i can 100% confirm that the subframe wont natively fit a zxr400L unless you want to be sat at a 30 degree incline :d
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
Norwegian400L1
Posts: 14
Joined: Fri Jun 01, 2018 11:55 am
My Bike: ZXR400 L1
Location: Norway

Re: Tyga conversions question?

Post by Norwegian400L1 »

Hi!

Yeah, I saw it was an old post, but thought i should ask either way :)

Thanks for the response! My newbie-ness shines through, but I would rather ask a "stupid" question, then not know at all biggrin

Well... that sounds like a rather awful position to ride :P
For those in disspair - I'm new to this :-D
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: Tyga conversions question?

Post by banner001 »

The zxr400L subframe width is 236mm, my '89 zxr250 is 180mm...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
Post Reply