Took a few pics

Post by **masterofinsanity** » Wed May 16, 2007 10:52 pm

those bolts only hold the ignition barrel on.

il4 · Post by **il4** » Thu May 17, 2007 3:52 am

hciR wrote:
il4: I tracked down the discs off an ebay member who was selling braking discs. Apparently braking do do (snigger) specific discs for the zxr, which they can supply.
Get hold of them here:

Stewart
Phaedrus Motorcycles
07966 720632
stewart@phaedrusmotorcycles.co.uk
http://www.phaedrusmotorcycles.co.uk

Hi there,

Thank you for your reply. Im too, a Braking Dealer here in my country. Last exchange with Braking is that they can make rotors for ZXR400, however I have to order a minimum quantity.

It sucks coz here in Singapore, ZXR400 is consider as junk as no one will ever wanna get their hands on aftermarket rotors or any other stuffs for that matter. Last i know theres only 3 guys who do track days with ther zxr400 my included. I guess i drop Stewart a mail and check with him.

Cheers

Mike

RedexRobB · Post by **RedexRobB** » Thu May 17, 2007 8:25 am

hciR wrote:You mean without undoing those bolts under the barrel?

Yep, if you take the ignition barrel off then i think it should come off all the same, but why do that when you just need to turn the bars

If you look at the front of the headstock there a key that part of the ignition barrel slots in, and remains underneath it so you cant lift the top yoke off. If you tun it all the way to the right theres a gap where the key can come out of.

Post by **hciR** » Thu May 17, 2007 5:24 pm

Nice one, wish I worked that out when I had it all apart though!