Ally welding. On a casting. Without doing any harm to the inside of the caliper. You'd have to be very damn good.Xphyral wrote:Ally welding.. You'd have to be damn goodGemini wrote:u any good at welding?
need help with caliper
Moderator: Moderators
-
deviant
- zxr400 oc member
- Posts: 1352
- Joined: Thu Jun 02, 2005 9:50 am
- My Bike: ZXR400 L3
- Location: Nottingham, UK
- Contact:
Re: need help with caliper
In the garage:
Kawasaki ZXR400 L3 - shiny
Suzuki DR800 - bouncy
1978 Suzuki GS400 - PROJECT RETRO RACER!
Kawasaki GPz500S - for sale soon
Honda CG125 BR-J - in bits
Kawasaki ZXR400 L3 - shiny
Suzuki DR800 - bouncy
1978 Suzuki GS400 - PROJECT RETRO RACER!
Kawasaki GPz500S - for sale soon
Honda CG125 BR-J - in bits
-
RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
-
Xphyral
- zxr400 oc member
- Posts: 492
- Joined: Thu Oct 13, 2005 3:23 pm
- My Bike: tomos moped
- Location: Scarborough
- Contact:
Re: need help with caliper
Almost godlike infact to weld the unweldable, they use an alloy that prevents you from doing such tom-foolery if i remember properly.deviant wrote:Ally welding. On a casting. Without doing any harm to the inside of the caliper. You'd have to be very damn good.Xphyral wrote:Ally welding.. You'd have to be damn goodGemini wrote:u any good at welding?
The trouble with having an open mind, is that people will insist on coming along and trying to put things in it.
-
DazSH
- zxr400 oc member
- Posts: 51
- Joined: Sat Aug 04, 2007 5:59 pm
- My Bike: ZXR400 L
- Location: Stockton
Re: need help with caliper
Shame it doesnt have a second bleed nipple like the rear zx4r caliper i snapped one of mine and my local garage welded the snapped one shut for me. Works well now took ages to bleed though lol.
ZXR 400 L1
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
4-2-1 Full stainless steel With titanium legal can.
Pipercross Filter
Crash bungs.
Needs a good tune
-
mongo
- Posts: 153
- Joined: Thu Feb 02, 2006 6:50 pm
Re: need help with caliper
It will do, as one is for one side of the caliper, and the other is for the other side. More than likely air will not pass between the two depending on location of where the air pocket is.....DazSH wrote:Shame it doesnt have a second bleed nipple like the rear zx4r caliper i snapped one of mine and my local garage welded the snapped one shut for me. Works well now took ages to bleed though lol.