Just a couple of sad pics
Moderator: Moderators
-
1256
- Posts: 5
- Joined: Tue Apr 03, 2007 1:23 pm
Just a couple of sad pics
Just trying to learn to use computer to send pics, hope you don't mind. Thankyou.
You do not have the required permissions to view the files attached to this post.
-
Scott221
- Restricted
- Posts: 909
- Joined: Tue Jan 16, 2007 6:23 pm
- My Bike: ZXR400 L9
- Location: Bham, U.k
-
Caz
- L-plate hell
- Posts: 488
- Joined: Fri Mar 07, 2003 5:35 pm
- My Bike: GSX-R600 K4
- Location: Oxfordshire
- Contact:
Re: Just a couple of sad pics
That's impressive - how d'ya manage that one?
GSX-R600 K4
ZXR400 H2
Commuter: Gilera Runner 180SP
Contributing writer to:http://jocke.selincite.com
ZXR400 H2
Commuter: Gilera Runner 180SP
Contributing writer to:http://jocke.selincite.com
-
1256
- Posts: 5
- Joined: Tue Apr 03, 2007 1:23 pm
Re: Just a couple of sad pics
Con rod wasn't up to the job. Here are a few more from another bad day at the office.
You do not have the required permissions to view the files attached to this post.
-
rene
- zxr400 oc member
- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: Just a couple of sad pics
flipping eck never herd of someone snapping the conrod on the 400 before, good effort!
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
-
saka_ZXR
- zxr400 oc member
- Posts: 404
- Joined: Tue Nov 18, 2008 8:59 pm
- My Bike: Kawasaki ZXR 400 L3
- Location: Manchester
Re: Just a couple of sad pics
Jesus abit of damage u done there mate.
If it's broke spray it with WD40, if it's still broke spray it again and leave it over night, if it's still broke, bin it.
-
Caz
- L-plate hell
- Posts: 488
- Joined: Fri Mar 07, 2003 5:35 pm
- My Bike: GSX-R600 K4
- Location: Oxfordshire
- Contact:
Re: Just a couple of sad pics
got any idea where the initial was? or what caused it? poor lubrication?
GSX-R600 K4
ZXR400 H2
Commuter: Gilera Runner 180SP
Contributing writer to:http://jocke.selincite.com
ZXR400 H2
Commuter: Gilera Runner 180SP
Contributing writer to:http://jocke.selincite.com
-
1256
- Posts: 5
- Joined: Tue Apr 03, 2007 1:23 pm
Re: Just a couple of sad pics
The bearing one was from lack of lubrication to that big end.
The engine was then rebuilt and.....
the conrod gave up just 9 hours of use after. It wiped out 4 stainless valves and a cylinder barrel as well. Just a bit of bad luck really
latest engine build has held out so far. (this is not a road bike, the engine is'nt standard so stuff can go wrong a little more often with expensive consequences)
The engine was then rebuilt and.....
the conrod gave up just 9 hours of use after. It wiped out 4 stainless valves and a cylinder barrel as well. Just a bit of bad luck really
latest engine build has held out so far. (this is not a road bike, the engine is'nt standard so stuff can go wrong a little more often with expensive consequences)