Just gone to fit my Micron system, bought about 2 years ago but never fitted.
Did bolt up but middle of linkpipe was 6" away from swingarm!
Someone please tell me what header pipe goes where or if i've got a 750 exhaust or something!
Linkpipe OD is 63mm.
Cheers
Gareth
Micron exhaust won't fit!
Moderator: Moderators
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Micron exhaust won't fit!
does it need turning 90 degrees?
Not overly familiar with these, but im sure someone here had a similar problem before and all they had to do was rotate it.
Not overly familiar with these, but im sure someone here had a similar problem before and all they had to do was rotate it.
-
- Posts: 14
- Joined: Tue Mar 24, 2009 9:32 pm
- Location: Essex
Re: Micron exhaust won't fit!
Think it's a combination of a long week, Friday night and too much Stella!
After swopping over No. 1 & 4 headers, it's now running but blowing - will look at tomorrow.
First time it's ran in nearly 9 years!
Thanks
Gareth
After swopping over No. 1 & 4 headers, it's now running but blowing - will look at tomorrow.
First time it's ran in nearly 9 years!
Thanks
Gareth
-
- CBT slow
- Posts: 734
- Joined: Mon Oct 06, 2008 5:41 pm
- My Bike: zxr400 H2
- Location: essex
Re: Micron exhaust won't fit!
9 years? thats a long old time lol
- kwackkev22
- Posts: 143
- Joined: Tue Nov 01, 2005 9:24 pm
- My Bike: tomos moped
- Location: henor/ derby
- Contact:
Re: Micron exhaust won't fit!
you should have the 2 with the spring fittings in the middel as for the outer 2 ones mybe try possable combos with them
previous bikes
piaggio nrg 50
cagiva mito 125
current bike zxr400l9
piaggio nrg 50
cagiva mito 125
current bike zxr400l9