LED indicator problem

[tink]

this is confussing me why

fitted front and rear led indicators and also led flasher relay

first problem i had was when i indicated right all four flashed and the same when i indicated left, after removing the bulb on the indicator reminder the problem was solved indicate left and left flash and same with the right.

But then i fitted a led bulb in the reminder light and its back to all four flashing.

Anyone know how to solve it?

[razzcolio]

should imagine its a current issue,
wrong indicator relay coz theres still too much going through the system?

or summat i duno lol

i couldnt get the front AND rear to go either, ive only got the front led, the rear is normal,it works fine...

[tink]

they flash fine until i put a bulb in the reminder light

[tink]

This is really getting on my nerves now tried a number of differen LED bulbs now

[paula w]

Check all the wires and connectors might just be wires making contact that shouldnt hence all coming on t the same time it could be shorting something out x

[tink]

wiring has been checked and looks fine.

Still got the problem

[Mori Man]

How do the LED indys earth ?

Check the connection inside them, try earthing them out yourself with additional wire and see if it cures it then make a permanent solution.

Wrong relays usually have them flashing at the wrong rate.

[tink]

just brought a couple of led load resistors to fit to the rear ones to see if they help and gonna leave the front leds to run off the led relay

[tink]

solved the problem by putting a 50w resistor on each of the rear led indicators.
Now have my light flashing on the indicator panel when they are on and the resistors also solved my 10%-100% flash

[armo]

Hi there I was just wondering how and where you fitted the resistors for the indicators as I am having the same problem with mine

[tink]

Hi there I was just wondering how and where you fitted the resistors for the indicators as I am having the same problem with mine

I fitted 1 to each rear led indicator and changed the relay to a led one

[armo]

Yes that what I tryed to do and some reason I seem to have all 4 on at once still it's really confusing me now, but if I put a extra bulb set of indicators on the front it works fine, it's frying my brain at the minute haha

[CaNsA]

solved the problem by putting a 50w resistor on each of the rear led indicators.
Now have my light flashing on the indicator panel when they are on and the resistors also solved my 10%-100% flash

[armo]

I am gonna sound like a idiot now but I did all that but still doesn't seem to of worked, wondering if any body had any ideas