Page 2 of 2

Re: lightweight sprockets for H1?

Posted: Wed Jan 26, 2011 11:33 pm
by Mori Man
motoxxx wrote:yea but i cant read japanese websites to order stuff from there.
unless you know of any good ones....
Click my website link :smt003

Re: lightweight sprockets for H1?

Posted: Thu Feb 17, 2011 7:58 pm
by motoxxx
well after ordering them from intobikes.co.uk my rear sprocket doesnt fit :smt009

the packaging says its for a 89 and the code is correct. hmmmm not sure about this one

Re: lightweight sprockets for H1?

Posted: Thu Feb 17, 2011 9:49 pm
by zxr500man
i hate when that happens :smt012

Re: lightweight sprockets for H1?

Posted: Thu Feb 17, 2011 11:28 pm
by Mori Man
motoxxx wrote:well after ordering them from intobikes.co.uk my rear sprocket doesnt fit :smt009

the packaging says its for a 89 and the code is correct. hmmmm not sure about this one
If your still needing one tell me what Teeth you want and I will get you one - I can also confirm it will fit as I have a hub out on veranda to fit it too................. no chance of it not fitting then :smt001

Sunstar sprockets at amongst the lightest you can get - have many customers using them on their 11/1200's with out issue. One fella has a turbo 1200 and he got his about 4 years ago now, in that time I have never had him complain about it.

MM!

Re: lightweight sprockets for H1?

Posted: Fri Feb 18, 2011 8:31 pm
by motoxxx
Hey mori, can i get you to do me a favour. i just had an email back from the guy at intobikes and he contacted renthal and they say that i have either an h2 carrier or an l1 carrier. Very strange as i bought the bike as an original road bike and converted it to race. could you do me a favour and measure your h1 carrier and see if its the same as my pictures.
thanks

Re: lightweight sprockets for H1?

Posted: Sat Feb 19, 2011 3:24 am
by Mori Man
Not sure if its a H1 or H2 hub as I picked it up as a spare.

I will compare these measurements with the hub on my bike which I know to be H2

so here are the dimensions:

Stud to Stud centre: 52 mm

Centre hole: 80mm

Stud: 10mm

Stud mounting Diameter: 104mm

The Afam sprocket is same measurements as your diagrame.

Re: lightweight sprockets for H1?

Posted: Sat Feb 19, 2011 7:41 am
by Mori Man
So, yip its a H2 hub that I have.

I was along at the shop today and looked at the RH-103 Sunstar sprocket thats listed for the H1

Its centre hole is: 105mm
Stud to Stud looked like 70~75mm

So no way a H1 / ZX4 Rear sprocket is going onto a H2 / L hub.

Your pictures are definetley H2 / L fitment.

MM!

Re: lightweight sprockets for H1?

Posted: Sat Feb 19, 2011 11:00 am
by motoxxx
wow thats wierd as i bought the bike as a road going bike, de registered it and raced it. i have two sets of wheels, the other set was from an h1 also. very strange but thanks heaps for your help!