inlet rubbers
Moderator: Moderators
-
- Posts: 4
- Joined: Sun Jul 13, 2014 9:53 am
- My Bike: Zxr400
inlet rubbers
Hi all, I have an air leak round my in let rubbers, revs hang at about 4 thou before dropping right down, I sprayed carb cleaner round them and it revs up so definate leak. I have replaced the o rings under the inlets, there are no visable splits and all carb clamps are tight but I still have the leak, any suggestions?
- Miles
- zxr400 oc member
- Posts: 503
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: inlet rubbers
Take the rubbers back off and try putting liquid gasket in around the O-rings . Belt & braces