zxr400h cooling problems
Posted: Mon Jul 01, 2013 4:25 pm
Hey guys
Having some serious issue with cooling my kwak
I filled up the coolant in the expansion camber to the full level mark an took the faring off to get to the rad cap only to discover she doesn't have one. Was jus wondering how you would fill her up with the amount specified? Also she seems fine when going at speed (needle sits about half way) but in crawl traffic the needle starts to raise rapidly an starts to boil the coolant out. The fan seems to have a mind of its own only switching on rare occasions
cheers in advance
Damian
Having some serious issue with cooling my kwak
I filled up the coolant in the expansion camber to the full level mark an took the faring off to get to the rad cap only to discover she doesn't have one. Was jus wondering how you would fill her up with the amount specified? Also she seems fine when going at speed (needle sits about half way) but in crawl traffic the needle starts to raise rapidly an starts to boil the coolant out. The fan seems to have a mind of its own only switching on rare occasions
cheers in advance
Damian