Zr400 xanthus engine
Moderator: Moderators
-
- Posts: 7
- Joined: Wed Aug 12, 2020 4:01 pm
- My Bike: Zxr400 , zrx1100
Zr400 xanthus engine
Hi . I have a rare Kawasaki zr400 xanthus 1992. This was a jap import only. There is very little info available for this bike. But I do know it has a zxr400 derived engine. Anyone here know about these bikes and whether the zxr400 engine will slot straight in . Thanks
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Zr400 xanthus engine
No idea, the engines are fairly similar, though not identical looking by any means.
The rough mounting points look to be in a similar position. You could make some measurements and the post them up here (being very clear what you are referring to, so diagrams...) and some of us can see if it looks like it will fit.
Clearance above and below the engine would be another thing to consider, though given that you can get a 900cc motor I to a zxr400 frame, I'm sure you can get a zxr400 engine in a xanthus
The rough mounting points look to be in a similar position. You could make some measurements and the post them up here (being very clear what you are referring to, so diagrams...) and some of us can see if it looks like it will fit.
Clearance above and below the engine would be another thing to consider, though given that you can get a 900cc motor I to a zxr400 frame, I'm sure you can get a zxr400 engine in a xanthus
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 7
- Joined: Wed Aug 12, 2020 4:01 pm
- My Bike: Zxr400 , zrx1100
Re: Zr400 xanthus engine
Thanks for the info . I'll do that . Cheers
-
- Posts: 7
- Joined: Wed Aug 12, 2020 4:01 pm
- My Bike: Zxr400 , zrx1100
Re: Zr400 xanthus engine
Hi . I've measured between the 2 rear mounting points and its 180mm from centre to centre . Is this the same with the zxr400L ? Thanks
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Zr400 xanthus engine
Just checked on my zxr400, 180mm is correct
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 7
- Joined: Wed Aug 12, 2020 4:01 pm
- My Bike: Zxr400 , zrx1100
Re: Zr400 xanthus engine
Thanks for the info