Page 1 of 1

Best Shock for ZXR400 H?

Posted: Tue Feb 20, 2007 10:15 am
by Little Loris
What's the best (and best value) rear shock for the ZXR400 H model?

I have the spring but no gas! Any way I can get these seperate or get it re-gassed somewhere?

Cheers ears! :smt003

Posted: Tue Feb 20, 2007 5:30 pm
by sloweracing
You could try Maxton suspension they can rework a old spring

Or on my race bike i run a Techno-flex same price as a Ohlins but horses for courses

Ohlins or techno - flex will fit a H2 model

Posted: Fri Feb 23, 2007 11:51 pm
by Shinobi675
I've got a technoflex on my L9. Seems that every rebuilder hates them though. Seems they're great shocks made by a bad rep company. HAve you found the same?

Posted: Tue May 22, 2007 3:15 pm
by Northern ANdy
recently discovered that my L shock is dead - the plates at the bottom are rusty. I have felt it is a little soft anyway. I read that gsxr600 shocks fit, then was told zx6r's do aswell. Some of the zx6 shocks (the early ones) have remote resevoir, do I need one of these, or will the piggy back resevoir fit also? No way of measuring one up , so hopefully someone will know.

Posted: Tue May 22, 2007 3:40 pm
by RedexRobB
I think the piggy back ones fit but you need to alter the battery box cos its in the way.

Posted: Wed May 30, 2007 10:02 pm
by Northern ANdy
just won one on ebay, watch this space for battery box masacre

Posted: Thu May 31, 2007 12:19 pm
by gubbs
My bike to be is an H and the rear shock is great by all accounts, plenty of rebound dampening left in her.

Best shock for the H imho is the OEM one. Loads on ebay ..

Posted: Sat Jun 02, 2007 7:37 pm
by Northern ANdy
the 6r shock with piggy back resevoir doesn't fit. Its 3/4" too long for starters. The battery box would need obliterating not modifying. Holes at the bottom are the wrong size aswell.

Just bought a H shock, hope that fits.

Posted: Sun Jun 03, 2007 10:12 am
by RedexRobB
H shock fits no problem mate :smt001

Posted: Sun Jun 03, 2007 12:28 pm
by Northern ANdy
oh good. Get my swingarm and other bits back tomorrow. Wheels get bead blasted tomorrow aswell.