Hi all
I'm trying to change the headstock bearings on my L1. It appears I need to take off my ignition but I haven't got a tool to fit the gubbins holding it on - (I assume it's some sort of security thing, it looks like a male star key fitting).
Anyone know where I can get the tool for this (or at least what it's called so I know what to look for?)
Cheers
Morg
Headstick bearings wtf
Moderator: Moderators
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
they are usually fitted with snap off bolts unless the ignition has been replaced then sometimes people just put cap heads or torx bolts in, the star type ones you suggest are the torx jobbies, you should be able to get a socket or bit for it from halfords, b&q or your local car accessory place.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 102
- Joined: Thu Apr 13, 2006 5:14 pm
-
- Posts: 20
- Joined: Sat Dec 09, 2006 10:20 pm
Aha! must be the same on the blade, was gonna polish the yoke ages ago and couldnt get the lock off. now i know why, hey you learns something new every day!masterofinsanity wrote:they are usually fitted with snap off bolts unless the ignition has been replaced then sometimes people just put cap heads or torx bolts in, the star type ones you suggest are the torx jobbies, you should be able to get a socket or bit for it from halfords, b&q or your local car accessory place.