vfr400 nc30/35 swingarm

Moderator: Moderators

Post Reply
kingkenny
Posts: 2
Joined: Mon Aug 06, 2012 9:47 pm
My Bike: zxr 400 l

vfr400 nc30/35 swingarm

Post by kingkenny »

i am looking at building a zxr special and im think about fitting nc30/35 single side swing arm i was wondering if this has been done before and how much work is it to fit
User avatar
banner001
Track day God
Track day God
Posts: 2584
Joined: Sat Sep 24, 2011 3:27 pm
My Bike: ZXR400 L4
Location: Nuneaton

Re: vfr400 nc30/35 swingarm

Post by banner001 »

think it might have been done before...expect it to be a MASSIVE amount of work.

if you cant strip and rebuild an engine, dont even think about doing it.

dont expect to get exact specs on here about exactly what/how to do everything...its too specialised a job, but expect to look at relocating the rear brake, suspension, aligning the sprockets, correctly centering the wheel along the length of the bike, checking ride height etc...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said :smt003
Post Reply