end can looks really close to swingarm
Moderator: Moderators
-
- Posts: 21
- Joined: Sun Jan 18, 2009 3:12 pm
- My Bike: zxr 400 l4
end can looks really close to swingarm
Hi I bought a zxr 400 trackbike last week but on closer inspection the end can looks really close to the swingarm in fact the strap has worn a bit of the pain away is this normal?? If not how close should it be
-
- Restricted
- Posts: 825
- Joined: Fri Aug 26, 2011 9:31 pm
- My Bike: zxr 400 l6
Re: end can looks really close to swingarm
Their relatively close, I personally think the hanger has a bit too much flex
- KwakKwak
- zxr400 oc member
- Posts: 462
- Joined: Sun Jun 16, 2013 11:10 pm
- My Bike: ZXR 400L9 2001
- Location: Carrickfergus, Northern Ireland.
Re: end can looks really close to swingarm
35mm gap on mine, Scorpion can.
Does the low seat height reflect the low intelligence? Easier to get an asshole onto.
-
- Posts: 21
- Joined: Sun Jan 18, 2009 3:12 pm
- My Bike: zxr 400 l4
Re: end can looks really close to swingarm
Im thinking that my downpipes may be bent slightly at the collector then ive only got about 8mm clearance and the hanger strap rubs on the swingarm and has done for a while but the headers look to be right and tight
-
- Posts: 243
- Joined: Sun May 12, 2013 7:10 pm
- My Bike: Zxr400
Re: end can looks really close to swingarm
My can touches the swingarm, need to sort it out but concentrating on getting the thing running first
-
- Posts: 21
- Joined: Sun Jan 18, 2009 3:12 pm
- My Bike: zxr 400 l4
Re: end can looks really close to swingarm
Managed to sort it out by taking off the end can strap and bending the hanger further out then pulling the can out to reattach the strap ive got plenty of clearance now
-
- Restricted
- Posts: 825
- Joined: Fri Aug 26, 2011 9:31 pm
- My Bike: zxr 400 l6
Re: end can looks really close to swingarm
Somehow I need to stop my can scraping the road
-
- Posts: 21
- Joined: Sun Jan 18, 2009 3:12 pm
- My Bike: zxr 400 l4
Re: end can looks really close to swingarm
If its a slip on system take it to a exhaust place and have it customised into a high level can next to the fairing it shouldn't cost too much
- KwakKwak
- zxr400 oc member
- Posts: 462
- Joined: Sun Jun 16, 2013 11:10 pm
- My Bike: ZXR 400L9 2001
- Location: Carrickfergus, Northern Ireland.
Re: end can looks really close to swingarm
Seemed too obvious to suggest, some naughty person has probably dropped it and bent the hanger in.Deano2485 wrote:Managed to sort it out by taking off the end can strap and bending the hanger further out then pulling the can out to reattach the strap ive got plenty of clearance now
Does the low seat height reflect the low intelligence? Easier to get an asshole onto.
-
- Restricted
- Posts: 825
- Joined: Fri Aug 26, 2011 9:31 pm
- My Bike: zxr 400 l6
Re: end can looks really close to swingarm
Mines a 3 bolt hole exhaust, I don't know what to fox thing keeps trying to highside me as I'll and up with only my front tyre,knee and exhaust in contact, so it tries to spin out, catches then highside me, I'll upload some of the damage pictures