Hello folks,
Bought a black widow exhaust system to replace the old system.
Problem is when I offer this system up it doesn't line up. In fact if you put pipe 1 into the head, pipe 4 is out by about an inch and and half!
I read people had to 'bend' these pipes to make them fit but surely not by that amount.
Any advice?
Black widow Exhaust (Sandy Bike)
Moderator: Moderators
- Miles
- zxr400 oc member
- Posts: 503
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
- 400y
- zxr400 oc member
- Posts: 114
- Joined: Tue Aug 30, 2011 11:32 am
- My Bike: ZXR400H1 GSXR600
Re: Black widow Exhaust (Sandy Bike)
Put one on my H model and fitted perfect
- Miles
- zxr400 oc member
- Posts: 503
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: Black widow Exhaust (Sandy Bike)
Maybe I've just got a bad one. But if you put pipe 1 in by the time you get to four then you would have to pull the pipe over an inch to get it into the head.
In my opinion too much. Maybe this is normal?
In my opinion too much. Maybe this is normal?
- Dominik
- Posts: 110
- Joined: Tue Oct 07, 2014 11:05 am
- My Bike: Zxr 400 L3
- Location: Trier - Germany
Re: Black widow Exhaust (Sandy Bike)
Seems to be normal that they´re a little too far out each other...
Can you please tell me if the downpipes have somehow baffles or things in the "link pipe" or if it´s only pipe and nothing else? I mean such things which the oem ones have...
Can you please tell me if the downpipes have somehow baffles or things in the "link pipe" or if it´s only pipe and nothing else? I mean such things which the oem ones have...
Zxr 400 SL - 130kg