I`m looking at replacing my aftermarket end can for an original system. Previous owner claimed the bike had been dynojetted to suit can. Will the bike run rough if i refit an original?
Cheers guys
Dan
Original end can.
Moderator: Moderators
- DanL397
- Posts: 11
- Joined: Thu Apr 05, 2018 10:53 am
- My Bike: ZXR400 L2
Original end can.
Kawasaki ZXR400 L2
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Original end can.
Probably, the original can is quite restrictive
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 14
- Joined: Fri Jun 01, 2018 11:55 am
- My Bike: ZXR400 L1
- Location: Norway
Re: Original end can.
Hi, just wondering: Is it possible to remove db-killer from original end can?
For those in disspair - I'm new to this
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Original end can.
Nope, it's all Integral baffling and pipework...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Original end can.
What you can do though is drill out the rivets on the exterior of the original can and slip off the cover, you can now use this to resleeve another can to make it look identical to the original, but with a different interior...if that's what you are after.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 14
- Joined: Fri Jun 01, 2018 11:55 am
- My Bike: ZXR400 L1
- Location: Norway
Re: Original end can.
Good idea, but the original one is in pretty bad shape anyway, so figured I could have some fun with it. New temporary china end-can on the way from EBay. Previous ovner tried to drill som holes in the db-killer from outside-in, between the outer metall and inner hole... leaks exhaust everywhere
Allthough i have to saw and grind away the bolt-plate in the pipe, and weld spring-hooks to it. Planning to buy full system from black widow during this summer.
Allthough i have to saw and grind away the bolt-plate in the pipe, and weld spring-hooks to it. Planning to buy full system from black widow during this summer.
For those in disspair - I'm new to this