hi all,
Started doing few jobs on my bike, oil changes, chain and sprocket change (with help from a mate and also borrowing the majority of his tools!) and now i think its time to start building up my own tool kit. Unfortunately I cant afford a massive range of tools straight off but was just wondering what people suggest would be best to get first? I was thinking maybe a decent socket set and a torque wrench!?! Also where do people get their tools from? Had a quick look in halfords, I think their stuff will be more than adequate for my novice needs plus I cant afford snap on just yet . Any help will be greatly appreciated!!!
Cheers, Jon
Tools
Moderator: Moderators
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Tools
I bought a fairly comprehensive tool set from halfords last year as my Argos set was on its way out after about 8 years of use.. Has socket bits, spanners, hand tools and screw driver set, 230 odd pieces if iirc, was haf price at the time.
ooooo just found it, seems they have it on offer again!
http://www.halfords.com/webapp/wcs/stor ... yId_165572
That set alone will see you with almost everything you need to work on a the ZXR. I think the spanner set could be a bit better but a small spanner set isnt much.
ooooo just found it, seems they have it on offer again!
http://www.halfords.com/webapp/wcs/stor ... yId_165572
That set alone will see you with almost everything you need to work on a the ZXR. I think the spanner set could be a bit better but a small spanner set isnt much.
-
- Posts: 23
- Joined: Sat Apr 17, 2010 11:14 pm
- My Bike: zxr400 L2
Re: Tools
Just one more stupid question... which torque wrench you think would be best? Even after only a few jobs I have realised I am over tightening bolts. Very annoying when it snaps off!!!!
http://www.halfords.com/webapp/wcs/stor ... 1&x=23&y=7
http://www.halfords.com/webapp/wcs/stor ... 1&x=23&y=7
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Tools
well, you will probably use a torque wrench alot less than you think unless your going to do each and every bolt up according to the manual. Personally ive only used one a handful of times and that was when i was doing important bolts up like the swingarm and shock linkages.
Looking at those they are alot of money, personally id put the money towards tools youll use or what doesnt come with that set, like a hammer for example. Or maybe even carb balancers.
Decision is yours ultimately.
Looking at those they are alot of money, personally id put the money towards tools youll use or what doesnt come with that set, like a hammer for example. Or maybe even carb balancers.
Decision is yours ultimately.
- zxr400rider
- zxr400 oc member
- Posts: 59
- Joined: Mon Nov 30, 2009 8:14 pm
- My Bike: zxr400 h1
- Location: swindon
Re: Tools
if your after a cheap torque wrench look in machine mart, i got mine from there when i had to do the headgasket on my mondeo, more than upto thw job, cost around the 20quid mark aswell
ZXR400 H1 gsxr600 srad rear shock, h2 front forks, delkevic downpipes, art end can,110 mainjets, braided brake lines, L model single seat, led rear light and LOTS of fun