Page 1 of 1

Simon_ed's ZXR (77.2 bhp) L2

Posted: Thu Mar 15, 2012 10:21 pm
by simon_ed
Full Beet TI system
Flatslide carbs
Head skimmed/gas flowed
Kent adjustable cams
Kit airbox/ram air
+0.5 pistons
Lightweight tank
Lightweight rear disc
Lightened frame and swingarm
Rear brake is scooter caliper with modified caliper bracket
Quick action throttle
Cbr 600 coil sticks
Maxton front and rear

Making 77.2 bhp and we haven't fully set the flat slides up yet or put an ignitech ignition on it, so when it's complete I'd say 80 bhp is possible

Image
Image
Image
Image

Re: Simon_ed's ZXR (77.2 bhp)

Posted: Thu Mar 15, 2012 10:26 pm
by CaNsA
Image
Image
Image

Re: Simon_ed's ZXR (77.2 bhp)

Posted: Fri Mar 16, 2012 10:15 am
by mick41zxr
Mate nice work :smt003
I found with the ignitech that there was not so much in the way of power but able to smooth it out all the way through. Getting the flatties to really bark will though !!!! A graph would be nice & what are you revving to? Also what correction factor was applied on the dyno, yours is almost exact spec as mine.
Will have to get motivated now to get the other engine done.
Cheers,
MB

Re: Simon_ed's ZXR (77.2 bhp)

Posted: Fri Mar 16, 2012 12:41 pm
by simon_ed
Image

It was DIN and smoothing 5

Don't know what happened to the bottom bit but we literally just put it together and ran it, the flatslides were off another bike

Oh and it's a standard cdi not been chipped, which I think is 14,500 rpm

Re: Simon_ed's ZXR (77.2 bhp) L2

Posted: Fri Apr 06, 2012 5:56 am
by masterofinsanity
sweeeeet!! love that rear brake mod!!

Re: Simon_ed's ZXR (77.2 bhp) L2

Posted: Wed Apr 11, 2012 9:55 pm
by simon_ed
Image
Image

well happy with the bike, just need to do a few little bits to it to get it race ready and then see how it goes at Mallory with NG at the end of the month

Re: Simon_ed's ZXR (77.2 bhp) L2

Posted: Sat Aug 25, 2012 10:55 am
by simon_ed
Just rebuilt the motor after it had dropped off in power by about 6 bhp,replaced the valves as they were knackered, as new 0.5 piston rings, SP bottom end inc gearbox, clutch........here's hoping she gets near the 80bhp mark....

Re: Simon_ed's ZXR (77.2 bhp) L2

Posted: Fri Aug 31, 2012 7:33 pm
by R P Corse
Loving this!

The rear brake mod is quality, would love to do this to my H1, but have the braced swinger so have to find another way round it!

Keep it coming mate, loving the work

Re: Simon_ed's ZXR (77.2 bhp) L2

Posted: Fri Oct 26, 2012 10:42 pm
by simon_ed
just got a new motor fit in, fettled the flatslides and the new motor is kicking out 79.49 bhp but i reckon with a little bit more fettling we'd see 80 maybe 81 bhp :excited

Re: Simon_ed's ZXR (77.2 bhp) L2

Posted: Sun Oct 28, 2012 6:15 am
by masterofinsanity
bet thats mint to ride! :smt003

Re: Simon_ed's ZXR (77.2 bhp) L2

Posted: Sun Oct 28, 2012 9:00 am
by simon_ed
Not had chance to ride it yet, just wanting everything setup properly on the dyno then find a trackday and give it a blast