Who's zxr400 is kicking out the most BHP? show off your mods and your dyno printouts.
Moderator: Moderators
Mori Man
Blingmeister
Posts: 1976 Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN
Post
by Mori Man » Sun Apr 01, 2012 10:34 am
Standard engine
BEET Short 4-2-1 Ti system
33mm FCRs with 50mm Stacks
Base run , now the tuning can begin
BEET-with-33mmFCRs-Base.jpg
You do not have the required permissions to view the files attached to this post.
Nothing worse than having an H and not being able to scratch it !
L iving life on the edge, S u P posedly
Tirpitz
zxr400 oc member
Posts: 766 Joined: Sun Dec 12, 2010 2:45 pm
My Bike: Kawasaki ZXR400L4
Location: Doncaster, South Yorkshire
Post
by Tirpitz » Sun Apr 01, 2012 9:33 pm
So that's where you've been hiding
Come on then, what are you up to? Is this a new bike, or just a new engine?
ZXR400 L4, purple / black / pink
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
Mori Man
Blingmeister
Posts: 1976 Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN
Post
by Mori Man » Mon Apr 02, 2012 12:56 am
Tirpitz wrote:
Come on then, what are you up to? Is this a new bike, or just a new engine?
Neither , just finally got the H2 onto a rolling road with out the clutch throwing a wobbly , each power check is only costing 24 quid so the next couple of builds will be getting done too
Still no space to build a motor yet
But soon...........
Nothing worse than having an H and not being able to scratch it !
L iving life on the edge, S u P posedly
Tirpitz
zxr400 oc member
Posts: 766 Joined: Sun Dec 12, 2010 2:45 pm
My Bike: Kawasaki ZXR400L4
Location: Doncaster, South Yorkshire
Post
by Tirpitz » Mon Apr 02, 2012 12:17 pm
What was the fueling like?
ZXR400 L4, purple / black / pink
Hel braided hoses
Pirelli Diablos
Ohlins steering damper
A16 carbon fibre exhaust can
Nitron Sport shock
Mori Man
Blingmeister
Posts: 1976 Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN
Post
by Mori Man » Fri May 18, 2012 9:31 am
Been messing about with cams & CDIs
Still standard engine apart from the cam swap.
All-ZX4-F3.jpg
Now have J2 adjustable cam's in and F3 race CDI
J2CamF3CDIb.jpg
J2CamF3CDIa.jpg
J2CamF3CDIc.jpg
260Kmh = 162.5Mph
You do not have the required permissions to view the files attached to this post.
Nothing worse than having an H and not being able to scratch it !
L iving life on the edge, S u P posedly