Page 1 of 1
L2 was 77.2 now 79.49 bhp......that'll do
Posted: Sat Oct 27, 2012 9:57 pm
by simon_ed
Well my 400 is continuing to develop and we tried a new motor I got not long back and it's kicking out pretty much 80 bhp. Its running sp cams, 1208 rods, revving to 14,800, and +1 JE pistons. It's also got a RTD programmable ignition. We're gonna have a look at the valve timing cos I think it could be better, but to be honest on an all gear run on the dyno with the quickshifter it sounds awesome,
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Sat Oct 27, 2012 10:27 pm
by simon_ed
60BB4A03-6BC6-4B1E-A150-5B9F5053BB85-599-00000043E975EA69-1.jpg
finally managed how to put the pics on properly
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Mon Oct 29, 2012 10:02 pm
by Joshhiee
V nice! get this video out, + quickshifter? need to hear that
Re: L2 was 77.2 now 79.49 bhp......now with vid
Posted: Wed Oct 31, 2012 12:10 am
by simon_ed
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Sun Apr 07, 2013 11:05 am
by Big Hoddie
Sorry for my ignorance, but what are 1208 rods? I know you mean con rods, but dont get what the 1208 refers to...
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Tue Apr 30, 2013 12:22 am
by Darkzy43
Stroke possibly?
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Wed May 22, 2013 3:43 pm
by AFM327
I believe the 1208 rods are those manufactured in the last two or three years of the ZXR400.
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Wed May 22, 2013 3:46 pm
by AFM327
Looks like a pretty good dip at 12K where it should be rising. Did you have the ignition programed with known curves, such as the SP model?
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Fri Aug 02, 2013 11:32 pm
by simon_ed
sorry not been on for a while, the 1208 rods are a lot thicker that's all, there's some more goodies coming for the bike and looking forward to getting back on the old girl and ringing her neck lol !!!
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Mon Aug 19, 2013 9:38 pm
by Robbie
What carbs are you running? if cvs how are they set?
cheers
Re: L2 was 77.2 now 79.49 bhp......that'll do
Posted: Tue Aug 27, 2013 9:40 pm
by simon_ed
its running flatslides, I swapped the engine back to the +0.5mm engine and we've been tinkering and its now reading 78.98 bhp, the +0.5mm motor has been in all year, we've just been trying to get the flatslides somewhere near for sometime
