Dan did you use the cam shaft caps from your orginal engine..............if memory serves me right these are machined to match the cylinder head.
And did you check the oil clearance for the "new" camshafts ?
Not everything is machined to the exact same size I'd hate to think you had a mismatch and ended up with even more problems.
Measuring Valve Clearances.
Moderator: Moderators
-
- zxr400 oc member
- Posts: 3341
- Joined: Sat Jan 08, 2005 10:33 am
- My Bike: tomos moped
- Location: Carrickfergus Northern Ireland
- carsounds_dan
- L-plate hell
- Posts: 268
- Joined: Mon Aug 06, 2007 10:07 pm
Re: Measuring Valve Clearances.
the cams measured up exactly the same as the others using a plastigue thingy. I used the cam caps that were originally cast with the head.. god only knows what would happen if i swapped them over
cheers
dan
cheers
dan
The bike only goes as fast as you want it to...
...i know, it's great
...i know, it's great