The main wiring diagram is now an attachment at the bottom of this thread - HERE
I have kept my oil pressure light as it serves 2 functions:- firstly, i like to know that the oil is in my bike and not flooding out on track, and secondly the light will only be on if your bike's battery is connected and the bike is not running...prevents you from leaving it on there accidentally. If you wish to remove this simply remove the 2 wires at any stage of your wiring build.
Note: Change the 30A main fuse to a 10A
1. Full wiring diagram
![Image](https://farm5.staticflickr.com/4319/36204462436_afe5ae920c_b.jpg)
2. Remove horn, sidestand switch and neutral switch:
![Image](https://farm5.staticflickr.com/4300/36078641012_c9ac242221_b.jpg)
3. Remove indicators front and back:
![Image](https://farm5.staticflickr.com/4329/36204462176_282719daf6_b.jpg)
4. Remove indicator dash light and turn signal relay:
![Image](https://farm5.staticflickr.com/4299/36078640732_8556c604cc_b.jpg)
5. Remove headlights and city light:
![Image](https://farm5.staticflickr.com/4297/36204461856_58bbb31198_b.jpg)
6. Remove licence plate light and rear/brake lights:
![Image](https://farm5.staticflickr.com/4305/36078640582_0245f5898c_b.jpg)
7. Remove cooling fan and wires from fan switch:
![Image](https://farm5.staticflickr.com/4305/36204461756_a38b60f270_b.jpg)
8. Remove headlight relay and wires to LHS:
![Image](https://farm5.staticflickr.com/4323/36078640362_75f17aefde_b.jpg)
9. Remove remaining wires connecting to LHS and clutch lockout switch:
![Image](https://farm5.staticflickr.com/4328/35853275390_41c0131cfc_b.jpg)
10. Remove remaining headlight wires of RHS and neutral light:
![Image](https://farm5.staticflickr.com/4297/36078642042_ee6ea6e9ea_b.jpg)