Kawasaki logo on screen
Moderator: Moderators
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Kawasaki logo on screen
Could someone do me a huge favour and measure the length and width of the Kawasaki logo on the screen?
Managed to pick up an original but the logo has almost disappeared from it
Managed to pick up an original but the logo has almost disappeared from it
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Kawasaki logo on screen
Just measured mine on the screen its 100mm long by 15mm high
We are we're we are..
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: Kawasaki logo on screen
Thanks shaggy, just putting the finishing touches to my resto.
Your bike is looking well. Hope mine comes up as well as that.
Your bike is looking well. Hope mine comes up as well as that.
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Kawasaki logo on screen
No problem and thank you for the comments re the bike.
It's good to know your restoring yours, the little 400s are still being raced and crashed.. not many resto's which is a shame. By the time people wake up the parts will be rare and hard to find
Let me know if you need anything else
TS
It's good to know your restoring yours, the little 400s are still being raced and crashed.. not many resto's which is a shame. By the time people wake up the parts will be rare and hard to find
Let me know if you need anything else
TS
We are we're we are..
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: Kawasaki logo on screen
I know, I've noticed that certain parts have become harder to find even over ther last two years.
I have however come across some great finds in my time, for example whilst on holiday in Australia I found a brand new unopened UK Zxr wiring loom for £100 at a breakers/store.
I am however trying to find a good photo of the warning label next to the rhs indicator so if you've a close up of a good one that would be great and I'll get it made up, Kawasaki don't do them anymore.
I have however come across some great finds in my time, for example whilst on holiday in Australia I found a brand new unopened UK Zxr wiring loom for £100 at a breakers/store.
I am however trying to find a good photo of the warning label next to the rhs indicator so if you've a close up of a good one that would be great and I'll get it made up, Kawasaki don't do them anymore.
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Kawasaki logo on screen
Are you wanting picture of the black oil engine label ?
Or the silver daily maintenance label that fits inside the fairing?
Or is it another one?
I will try to help
TS
Or the silver daily maintenance label that fits inside the fairing?
Or is it another one?
I will try to help
TS
We are we're we are..
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: Kawasaki logo on screen
It's the sticker that sits near your right knee, black with white writing. Can't remember what it's about, it's the only one that kwak don't do anymore.
I have the rest ready to go on the bike
I have the rest ready to go on the bike
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Kawasaki logo on screen
This one? Its gloss black with white writing
Measures 8cm long x 3cm high
Measures 8cm long x 3cm high
We are we're we are..
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Kawasaki logo on screen
If you find some or get some made, I would be pleased to buy a few
We are we're we are..
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: Kawasaki logo on screen
That's her, thanks shaggy. A friend of mine runs a vinyl/logo company so he's making me them up.
Says he can make them up as stickers instead of vinyl so would be closer to the original.
Not a problem I'll get him to do a run of 10 or so and post you some over free of charge
Says he can make them up as stickers instead of vinyl so would be closer to the original.
Not a problem I'll get him to do a run of 10 or so and post you some over free of charge
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Kawasaki logo on screen
That's fantastic mate, happy to pay for them, no problem.
Can't say mine is stuck down too well so great to have a couple spares .. Having rebuilt mine its a keeper now anyway .. In fact I can see me doing another as I've got the bug now.. but the next one may get more of a regular thrashing..haha
Can't say mine is stuck down too well so great to have a couple spares .. Having rebuilt mine its a keeper now anyway .. In fact I can see me doing another as I've got the bug now.. but the next one may get more of a regular thrashing..haha
We are we're we are..