www.zxrworld.co.uk

Hi all,

Just after some info for fork top and how to adjust them also are they H1 or H2.

When trying to turn adjuster with screwdriver it is tight and won't move left or right, do i have to loosen the nut below it before i can turn the screw.

Put a pic up for identification and so you can see what i mean.

Thanks.

no you dont need to loosen the nut...........the screw should turn.

but it's likely to be siezed.

Has the fork been serviced recently ?

Hi Cargo,
Thanks for reply, All i have done is replace the seals and dustcover,
next job is to remove rust from top are they a pain to unseize.
Cheers