Page 1 of 1

H Model Break Disks on a L model

Posted: Wed Sep 26, 2007 4:41 pm
by Head-Down
hi, iv seen some front wavey disks for the zxr400 H model and was wondering if these would fit my L model? thanks

Re: H Model Break Disks on a L model

Posted: Sun Sep 30, 2007 12:29 pm
by zimm
they will fit the wheel, and have the same offset, but will have a 10mm smaller diameter. so they'll work, but wont be hit by all of the brake pad.. which would/could cause problems as the pads wear..

i wouldn't bother, just get some 310mm discs made for an L, there's loads out there

Re: H Model Break Disks on a L model

Posted: Sun Sep 30, 2007 5:35 pm
by RedexRobB
http://cgi.ebay.co.uk/zxr400-wavey-fron ... dZViewItem

If you want something fancy, i have these on my L model and they work pretty damn well :smt001 Good price too, i bought a set which included the front and rear disks and a set of pads all round all for £350. Just the fronts on thier own i think are in the region of £250. Just whatever you do, dont goto the place where you can buy them new, they are absolute twats.

Re: H Model Break Disks on a L model

Posted: Sun Oct 07, 2007 11:14 am
by zxr_oli
Where are these H disks?
I want want some wavey ones, thats as soon as i get some money, and sort my valves :p