This:
![Image](http://i192.photobucket.com/albums/z172/chowderdogg/ZXR400raceloom_zps4907559f.jpg)
Now im running total loss , ive edited out what i thinki dont need on this photo, can someone confirm that im not comepletely useless with wiring
Total Loss Edit:
![Image](http://i192.photobucket.com/albums/z172/chowderdogg/7b8eeadc-a5c1-4fd2-b7a1-0ebb44665fc3_zps12c5389a.jpg)
Moderator: Moderators
again, neutral light is up to you, but its easier to see if you're in neutral than to see that you have oil pressure...ChowderV4 wrote:cheers for the replies, im pretty sure ive done everything right, only have to solder a few wires together now and solder in the resistor.
Yeah i was planning to keep the oil pressure light, its not really worth wiring in the neutral light is there?
I will see if ive done everything right soon when i try starting it
I would get intouch with Rodger at rmkd if i wer you hes a genious with wireing an will tel you over the phone wats wrong. He told me last week wen i had trouble that their was a race loom on hear somewhere that wasnt rightChowderV4 wrote: by ChowderV4 » Sat Feb 01, 2014 2:38 pm
ok so ive plugged everything into the loom, i have power, temp guage moves when killswitch is on.
When i press the starter i get a click from the starter solonoid the tacho will move if the start button is held down, but it isnt cranking.
Any ideas before i start panicing , i have followed the race diagram o
cheers for that, if the new resistor doesnt sort it i will give him a ringmatthew wrote:I would get intouch with Rodger at rmkd if i wer you hes a genious with wireing an will tel you over the phone wats wrong. He told me last week wen i had trouble that their was a race loom on hear somewhere that wasnt rightChowderV4 wrote: by ChowderV4 » Sat Feb 01, 2014 2:38 pm
ok so ive plugged everything into the loom, i have power, temp guage moves when killswitch is on.
When i press the starter i get a click from the starter solonoid the tacho will move if the start button is held down, but it isnt cranking.
Any ideas before i start panicing , i have followed the race diagram o