Gearing

RussZXR · Post by **RussZXR** » Sat Oct 28, 2006 7:18 am

Hi,
As I'm not going to use the 130mph the bike is capable of around where I live I am looking at upping the acceleration by changing the sprokets front and back. Has anyone already done this and found a good setup? save me sodding about experimenting.
Thanks
Russ

Post by **masterofinsanity** » Sat Oct 28, 2006 8:27 am

do 2 searches, 1 for tooth and another for sprocket and you will see previous threads on this subject.

RussZXR · Post by **RussZXR** » Sat Oct 28, 2006 9:05 am

Thanks

RussZXR · Post by **RussZXR** » Mon Oct 30, 2006 5:47 pm

Great stuff. Now who can recomend a supplier for non standard sprockets?

Post by **deviant** » Mon Oct 30, 2006 7:53 pm

renthal do every size imaginable and are probably one of *the* names for sprockets.

they crop up on ebay brand new sometimes. I just got a 47T rear for about 60% of the retail price. wanted a 49T but got outbid in the last 2 seconds

. I'll go for a 14T rather than 15T on the front now.

RussZXR · Post by **RussZXR** » Tue Oct 31, 2006 5:55 am

Thanks again. Should be able to shift my hefty frame about when I get it sorted.