K-BATL

briank · Post by **briank** » Fri Apr 20, 2007 11:51 pm

can any one help with part numbers for the K-BATL clutch fitted to the SP models many thanks Briank

RedexRobB · Post by **RedexRobB** » Sat Apr 21, 2007 8:27 am

Hello mate and welcome to the forum, the K-BATL was fitted to all ZXR models, not just the SP. So you should find it all in the microfiches on the main site, here:

http://www.zxrworld.co.uk/zxr400/micro.html

As your probably aware it stands for Kawasaki Back Torque Limiter, in other words a slipper clutch

Post by **masterofinsanity** » Sat Apr 21, 2007 9:19 am

all of them robB i thought it was just certain zxrs?

RedexRobB · Post by **RedexRobB** » Sat Apr 21, 2007 9:37 am

nope, all ZXR's have slipper clutches, or so im told anyway.

http://www.pbmagforum.com/view_topic.ph ... 4215#p4215

near the bottom of the page, from our friend Iain Knight

Gemini · Post by **Gemini** » Sat Apr 21, 2007 2:41 pm

my zx7 has definately got a slipper clutch, and looking thru spec it appears all of them have them...

although if my zxr400 had one then it didnt work cuz once when going into a corner i dropped too many gears and the fookin bike stood bold upright! lucky i didnt come off, so with this experience in mind, a slipper clutch would have prevented this

gem

Post by **masterofinsanity** » Sat Apr 21, 2007 3:59 pm

don't recall mine havin one either?