hey guys.
im just in the middle of striping down my engine but found that if i take the rockers out straight away then the springs etc will just drop into th eengine.
i wernt sure if there was anything that i could do that would make it easier to remove without droping everything int o the engine and making a massive mess.
Mingmingmo
Removing the Rockers
Moderator: Moderators
-
- Posts: 16
- Joined: Fri Dec 08, 2006 11:44 pm
- My Bike: ZXR400
- Location: Stevenage - Hertfordshire
Removing the Rockers
Mingmingmo
Sorry officer i thought you wanted a race .
Sorry officer i thought you wanted a race .
- Haggis
- Posts: 27
- Joined: Mon Sep 17, 2007 2:56 pm
- My Bike: ZRX1200s
- Location: Sarf Lundin - innit?
Re: Removing the Rockers
Never throw out old socks or T-shirts!
You might want to get yourself one of those magnet on a stick thingies too.
You might want to get yourself one of those magnet on a stick thingies too.
There's no substitute for cubes!
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Removing the Rockers
I never do, they always go straight into the 'rag box' in my shedHaggis wrote:Never throw out old socks or T-shirts!
Although sometimes i feel guilty because poor little Ishmal in Africa could probably do with my holed socks and t-shirts
-
- Posts: 16
- Joined: Fri Dec 08, 2006 11:44 pm
- My Bike: ZXR400
- Location: Stevenage - Hertfordshire
Re: Removing the Rockers
had a feeling that was the only/bets thing to do really.
ta guys
ta guys
Mingmingmo
Sorry officer i thought you wanted a race .
Sorry officer i thought you wanted a race .
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: Removing the Rockers
i just pulled the rocker shaft out slowly, plucking out the springs out one by one with the other hand and depositing them in a tub next to the engine.