head port

Moderator: Moderators

Post Reply
mcollier
Posts: 17
Joined: Sun Jan 17, 2010 8:33 pm
My Bike: zxr400

head port

Post by mcollier »

hi guys can you help, ive got a leak coming from the top of the head i think.
ive removed engine and found a hole under each head port for exhaust and there seems to be oil coming from there as well, does anyone know what these holes are and if oil is coming from there were is it coming from.
cheers
cargo
zxr400 oc member
zxr400 oc member
Posts: 3341
Joined: Sat Jan 08, 2005 10:33 am
My Bike: tomos moped
Location: Carrickfergus Northern Ireland

Re: head port

Post by cargo »

The four small holes are drain holes for each spark plug reccess........................and if the is oil coming from the holes then oil is leaking into the spark plug reccess

simples
mcollier
Posts: 17
Joined: Sun Jan 17, 2010 8:33 pm
My Bike: zxr400

Re: head port

Post by mcollier »

hi cargo so is it the seals around the top of the spark plug recess inside the rocker cover that have gone cos all spark plugs are dry.
or is there a more serious problem cos bike runs fine
cheers
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: head port

Post by Mori Man »

What Cargo said - likely some one removed the wells doing a shim check but didn't put new O rings on - they are one use only so replace every time you disturb.
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
mcollier
Posts: 17
Joined: Sun Jan 17, 2010 8:33 pm
My Bike: zxr400

Re: head port

Post by mcollier »

cheers for that mate will purchase some new ones and fit them
cargo
zxr400 oc member
zxr400 oc member
Posts: 3341
Joined: Sat Jan 08, 2005 10:33 am
My Bike: tomos moped
Location: Carrickfergus Northern Ireland

Re: head port

Post by cargo »

MM is talking about the o rings at the bottom of the spark plug well/recess

I would reuse the top seals and apply a little sealer
mcollier
Posts: 17
Joined: Sun Jan 17, 2010 8:33 pm
My Bike: zxr400

Re: head port

Post by mcollier »

do u mean the o rings on the spark plug trumpets (if thats you call them) when you remove them there is a o ring around the bottom of these trumpets.
cargo
zxr400 oc member
zxr400 oc member
Posts: 3341
Joined: Sat Jan 08, 2005 10:33 am
My Bike: tomos moped
Location: Carrickfergus Northern Ireland

Re: head port

Post by cargo »

mcollier wrote:do u mean the o rings on the spark plug trumpets (if thats you call them) when you remove them there is a o ring around the bottom of these trumpets.

That is the ones you should replace.
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: head port

Post by Mori Man »

mcollier wrote:do u mean the o rings on the spark plug trumpets (if thats you call them) when you remove them there is a o ring around the bottom of these trumpets.
Part # 92055-1403 x 4 about a fiver here for them so expect 2 quid each UK
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
mcollier
Posts: 17
Joined: Sun Jan 17, 2010 8:33 pm
My Bike: zxr400

Re: head port

Post by mcollier »

cheers for your help again new ones fitted
User avatar
Mori Man
Blingmeister
Blingmeister
Posts: 1976
Joined: Thu May 10, 2007 3:30 pm
My Bike: ZXR400J2
Location: JAPAN

Re: head port

Post by Mori Man »

That the oil weap sorted ?

Bikes looking real good :smt023
Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
mcollier
Posts: 17
Joined: Sun Jan 17, 2010 8:33 pm
My Bike: zxr400

Re: head port

Post by mcollier »

cheers again for valuable advice all sorted.
Post Reply