Hi guys,
On the workshop manuals it shows a 0.5mm shim being used between the engine and frame at the rear when refitting an engine. I didn't have this shim, do you need it ?
Cheers all,
John
0.5mm shim when refitting engine
Moderator: Moderators
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
- richie400ss
- Posts: 39
- Joined: Thu Sep 22, 2005 4:40 pm
- My Bike: tomos moped
- Location: newcastle
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
i lost mine when i rebuilt my bike, didn't bother putting one in.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
if your engines 0.5mm out of alignment and its a problem all i can say is them japs must be fantastic engineers to get it that critical.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.