brake pad fitment
Moderator: Moderators
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
brake pad fitment
Hi.will J model front pads fit the H models calipers???they look the same but thought id ask First
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
Re: brake pad fitment
Hmm.just bid and finally won ap racing organic sintered race pads for L model calipers thinking they would fit my H model calipers.so first £13 posted takes the set.or swap for H ones.
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: brake pad fitment
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
Re: brake pad fitment
Thanks banner...i read it AFTER I bid on pads for later calipers
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: brake pad fitment
good man, reads things on here, and not too proud to admit when wrong...you will fit in well, consider my garage open to you if you need a hand.richyrd5 wrote:Thanks banner...i read it AFTER I bid on pads for later calipers
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
Re: brake pad fitment
..cheers chap.very decent of you!...hey banner can you tell me what bodywork from L models will fit my H??.need a bodykit I rekon
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: brake pad fitment
none of itrichyrd5 wrote: ..cheers chap.very decent of you!...hey banner can you tell me what bodywork from L models will fit my H??.need a bodykit I rekon
L model fairings are all different to H model im afraid.
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 63
- Joined: Fri Feb 05, 2016 12:26 pm
- My Bike: 400h
Re: brake pad fitment
..ah right...thanks.
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: brake pad fitment
wtf I've never seen this thread before! amazing job! cheers Banner I owe you !banner001 wrote:viewtopic.php?f=121&t=14088
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: brake pad fitment
i try me best bossmasterofinsanity wrote:wtf I've never seen this thread before! amazing job! cheers Banner I owe you !banner001 wrote:viewtopic.php?f=121&t=14088
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said