Hi
Having taken my H1 apart a while ago I have 6 bearings I am not sure where they go??
There are 5 smaller bearings, they are needle one which look very similar (not in size) to the swing arm bearings.
I think 4 of these go in the forks, (2 on each side) but what about the other one.
I also have a 1 larger needle bearing (smaller than the swing arm ones though).
Any ideas on where these go would be greatly appreciated.
Thanks
Jon
Bearings - What are they?
Moderator: Moderators
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Bearings - What are they?
Pics and diameters would help loads matey.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 25
- Joined: Sat Jun 06, 2009 5:54 pm
- My Bike: ZXR400 H1
Re: Bearings - What are they?
O.K. - just got some pics and more info.
I have 5x BM2015 - sizes: 26mm OD, 20mm ID and 15mm width.
I also have 1x BM2516 - sizes: 31mm OD, 25mm ID and 15mm width.
Your help in identifying these would be great.
Thanks
Jon
I have 5x BM2015 - sizes: 26mm OD, 20mm ID and 15mm width.
I also have 1x BM2516 - sizes: 31mm OD, 25mm ID and 15mm width.
Your help in identifying these would be great.
Thanks
Jon
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Bearings - What are they?
off the top my head, and on looking at them i reckon the bottom one is a head race bearing.
the other do look like swing arm bearings
Having a look here, http://www.wemoto.com/bikes/Kawasaki/ZX ... /#BEARINGS
Could there be a sprocket carrier bearing in there maybe?
the other do look like swing arm bearings
Having a look here, http://www.wemoto.com/bikes/Kawasaki/ZX ... /#BEARINGS
Could there be a sprocket carrier bearing in there maybe?
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 25
- Joined: Sat Jun 06, 2009 5:54 pm
- My Bike: ZXR400 H1
Re: Bearings - What are they?
The head race bearings are tapered ones which I have, one at the top and one at the bottom.
The spocket carrier bearing is still in there, but is alot larger than these.
I also have the 2 swing arm bearings so cannot be them.
Any more ideas?
Thanks
Jon
The spocket carrier bearing is still in there, but is alot larger than these.
I also have the 2 swing arm bearings so cannot be them.
Any more ideas?
Thanks
Jon
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Bearings - What are they?
I cant think of where there would be 5 bearings the same....
the microfiche shows that the front and rear wheels have different bearings
Have you stripped the lump?
the microfiche shows that the front and rear wheels have different bearings
Have you stripped the lump?
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Bearings - What are they?
Wait one god damn minute!!!!!!!!
http://www.zxrworld.co.uk/images/hmicro ... ension.gif
shows there are 5 bearings needed in the rear shock linkage.
ITEM 92046
p/n - 92046-1112
i think thats where
http://www.zxrworld.co.uk/images/hmicro ... ension.gif
shows there are 5 bearings needed in the rear shock linkage.
ITEM 92046
p/n - 92046-1112
i think thats where
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 25
- Joined: Sat Jun 06, 2009 5:54 pm
- My Bike: ZXR400 H1
Re: Bearings - What are they?
Excellent - thank you!
The 5 smaller bearings were the rear shock linkage. Now all fitted!
Any ideas on the 1 larger bearing?
Thanks
Jon
The 5 smaller bearings were the rear shock linkage. Now all fitted!
Any ideas on the 1 larger bearing?
Thanks
Jon
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Bearings - What are they?
http://www.zxrworld.co.uk/images/hmicro ... aliper.gif
item number 92046
part number - 92046-1195
rear caliper holder
I AM MADE OF AWESOME!!!!!!
item number 92046
part number - 92046-1195
rear caliper holder
I AM MADE OF AWESOME!!!!!!
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::