H Fork top

Moderator: Moderators

Post Reply
ZX4R-F3
Posts: 95
Joined: Thu Jan 13, 2011 1:03 am
My Bike: 1988 ZX400-F3
Location: Ashton-u-Lyne

H Fork top

Post by ZX4R-F3 »

Hi all,

Just after some info for fork top and how to adjust them also are they H1 or H2.

When trying to turn adjuster with screwdriver it is tight and won't move left or right, do i have to loosen the nut below it before i can turn the screw.

Put a pic up for identification and so you can see what i mean.

Thanks.

Image
[b][color=#FF0000]If your not living on the edge, then your taking up to much room.[/color][/b]
Top
cargo
zxr400 oc member
zxr400 oc member
Posts: 3342
Joined: Sat Jan 08, 2005 10:33 am
My Bike: tomos moped
Location: Carrickfergus Northern Ireland

Re: H Fork top

Post by cargo »

no you dont need to loosen the nut...........the screw should turn.

but it's likely to be siezed.

Has the fork been serviced recently ?
Top
ZX4R-F3
Posts: 95
Joined: Thu Jan 13, 2011 1:03 am
My Bike: 1988 ZX400-F3
Location: Ashton-u-Lyne

Re: H Fork top

Post by ZX4R-F3 »

Hi Cargo,
Thanks for reply, All i have done is replace the seals and dustcover,
next job is to remove rust from top are they a pain to unseize.
Cheers
[b][color=#FF0000]If your not living on the edge, then your taking up to much room.[/color][/b]
Top
Post Reply

Return to “Suspension”