Like an idiot I removed the front forks to replace the seals and didn't make a note of the fork height. Kind of assumed this would be listed in the service manual but for the life of me I can't find it.
Anyone know what this should be on the L model?
Stock fork height.
Moderator: Moderators
- banner001
- Track day God
- Posts: 2589
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: Stock fork height.
I've always taken it as they should be flush with the headstock, you can probably get away with dropping them an once or so if you want more weight over the front, but your changing the geometry and head angle all the time then...
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 3
- Joined: Sun Nov 27, 2016 1:23 pm
Re: Stock fork height.
Ta!I've always taken it as they should be flush with the headstock,
Yeah, was trying to avoid that if possible but couldn't make out from my photos how much fork was showing originally. I guess if they were supposed to be something other than flush they'd have written down a measurement in the service manualchanging the geometry and head angle all the time then...