I have a problem, can anyone help. My new track bike...
Starts fine, charge rate is at 13.5 - 14 volts.
This voltage then progressivley gets higher until about 17.5 - 18 volts, and the bike then cuts out (this is normally about 5 - 10 minutes of running).
Have changed the regulator/rectifyer but this hasn't helped.
Anyone got any ideas?
Thanks in advance of any help.
Si
OVER CHARGING?
Moderator: Moderators
- warney
- Posts: 2
- Joined: Sun Apr 29, 2007 9:24 pm
- My Bike: tomos moped
- Location: lymington hampshire
- masterofinsanity
- Site Admin
- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
isn't your alternator/generator whatever they call it on a bike shagged when it does this?
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- Jamz
- zxr400 oc member
- Posts: 2034
- Joined: Tue Sep 17, 2002 4:21 pm
- My Bike: Kawasaki ZX9-R C2
- Location: Alvechurch, Near Birmingham
- Contact:
I'd have thought when you're alternator was shagged it won't be putting out enough charge (like mine), and I'd be looking at a reg/rec problem!
Is it possible the new unit is faulty too?
Also, I've heard quite a few people saying that it's best to change the alternator AND the reg/rec unit if one goes, because the faulty part can kill the new part when you replace it.
I got lucky with mine and the reg/rec seemed fine - but then I was having the opposite problem to yours...
Is it possible the new unit is faulty too?
Also, I've heard quite a few people saying that it's best to change the alternator AND the reg/rec unit if one goes, because the faulty part can kill the new part when you replace it.
I got lucky with mine and the reg/rec seemed fine - but then I was having the opposite problem to yours...
-
- Posts: 143
- Joined: Wed Apr 18, 2007 7:18 pm
- My Bike: zxr400 / 636
- Location: gillingham, kent
- Contact:
- warney
- Posts: 2
- Joined: Sun Apr 29, 2007 9:24 pm
- My Bike: tomos moped
- Location: lymington hampshire
thanks
thanks for everyones help and advice , i've spent the day going back over all the wiring and retesting components and it seems to be charging and running ok now !!
not sure what i done , lets hope all ok

not sure what i done , lets hope all ok

-
- Posts: 143
- Joined: Wed Apr 18, 2007 7:18 pm
- My Bike: zxr400 / 636
- Location: gillingham, kent
- Contact: