only fireing on 2 cyilinders

sole · Post by **sole** » Fri May 25, 2007 7:37 pm

is there anthing to look out for or is it just a case of running through all of the conectors the other 2 somtimes kick in and out

tomzxr400 · Post by **tomzxr400** » Sun May 27, 2007 10:54 pm

if they kick in and out check wiring mainly earths other than that check the whole system start at plugs and work back id check your ht leads are screwed in tight first they tend to unscrew then coils and pick up coil all tests are in the mauals on this site good luck

Post by **rene** » Mon May 28, 2007 11:25 am

first check that your getting a spark at the plug do this by takeing the plug out and tutching it to the engine (in a very dark room) then try to start it if you see the spark then you no its not the plug so more likly to be fuel!

if you arnt getting a spark then get a multi meter on the Coil and check that your getting 12Vs if not then work your way back checking every conector. if it is fireing on to then you should be getting a good earth but its always worth checking!