engine wont start -please help

Moderator: Moderators

raul
Posts: 90
Joined: Mon Sep 15, 2008 7:27 pm
My Bike: zxr400

engine wont start -please help

Post by raul »

hello guys'
i ride my bike daily and yesterday on the motorway i stopped for a coffee and fuel then my bike wouldn't start anymore.I put the ignition on (lights on oil and neutral ,side stand up) kill switch is on all the time ,and when you pres the starter button nothing happens not even a little noise a click nothing ,,, what can it be at fault ,or what should i check to eliminate things out to get to the problem?

ps-i did ride it Thur the bad weather could it be water got in somewhere? any advise much appreciated as i need my bike for Monday
-just forgot to say it will bump start with ease that's how i got home
cargo
zxr400 oc member
zxr400 oc member
Posts: 3342
Joined: Sat Jan 08, 2005 10:33 am
My Bike: tomos moped
Location: Carrickfergus Northern Ireland

Re: engine wont start -please help

Post by cargo »

Have a look at the sidestand cut out switch it sounds like it is sticking
lewisdale
CBT slow
CBT slow
Posts: 734
Joined: Mon Oct 06, 2008 5:41 pm
My Bike: zxr400 H2
Location: essex

Re: engine wont start -please help

Post by lewisdale »

check the connections on battery,solonoid,ans starter motor too,im sure its a bad connection somewhere, just wiggle all the plugs you can see lol
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: engine wont start -please help

Post by RedexRobB »

Sounds like the starter relay may have packed up. Short the terminals of the starter motor and it 'should' spin up and start. If it does then take a look at the relay. Theres a test in the manual that youll need a multimeter. I think there may be a fuse for it too, so might be worth checking.
cargo
zxr400 oc member
zxr400 oc member
Posts: 3342
Joined: Sat Jan 08, 2005 10:33 am
My Bike: tomos moped
Location: Carrickfergus Northern Ireland

Re: engine wont start -please help

Post by cargo »

I'll bet my shirt it's the side stand switch
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: engine wont start -please help

Post by RedexRobB »

best way to check that will be to pull the clutch in and see if it starts then.
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Re: engine wont start -please help

Post by RedexRobB »

actually, if its in neutral (the light comes on he says) that shouldnt have any probs starting even if the stand switch is messing about, should it?
raul
Posts: 90
Joined: Mon Sep 15, 2008 7:27 pm
My Bike: zxr400

Re: engine wont start -please help

Post by raul »

just had a try with the stand switch ,nothing the switch operates as normal is well greased and the return spring is strong ,so that's out
RedexRobB wrote:Sounds like the starter relay may have packed up. Short the terminals of the starter motor and it 'should' spin up and
start. If it does then take a look at the relay. Theres a test in the manual that youll need a multimeter. I think there may be a fuse for it too, so might be worth checking.
that was the first one in my mind i feared of (starter relay) i will look into it the evening , i hope is the fuse and i will check the switch gear as well ,you never know
gasman
Posts: 12
Joined: Sat Jan 31, 2009 12:39 pm
My Bike: kawasaki zxr400

Re: engine wont start -please help

Post by gasman »

do you get a click from the juntion box fitted above battery when you press the start button?
Davw
L-plate hell
L-plate hell
Posts: 472
Joined: Sun Jun 22, 2008 2:25 pm
My Bike: zxr400 track, vfr800 road
Location: Aberdeen, Scotland

Re: engine wont start -please help

Post by Davw »

Either battery is knackered (very cold weather) or the starter relay/ solenoid/ fuse is gone.

Try with jump leads from a car and if that doesnt work then the starter circuit needs checking
Fatspanner Racing/[/size][/color]
User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8111
Joined: Thu Aug 29, 2002 12:36 am
My Bike: Aprilia Tuono Fighter
Location: England
Contact:

Re: engine wont start -please help

Post by masterofinsanity »

gasman wrote:do you get a click from the juntion box fitted above battery when you press the start button?
was gonna say the same, you should get a click from the junction box.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
raul
Posts: 90
Joined: Mon Sep 15, 2008 7:27 pm
My Bike: zxr400

Re: engine wont start -please help

Post by raul »

no click at the fuse box
User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8111
Joined: Thu Aug 29, 2002 12:36 am
My Bike: Aprilia Tuono Fighter
Location: England
Contact:

Re: engine wont start -please help

Post by masterofinsanity »

take the fusebox apart and break the casing on the relay, then connect it up and see if it clicks when you press the starter, it may need the tab bending a bit.

see here for pics

viewtopic.php?f=55&t=7103
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
raul
Posts: 90
Joined: Mon Sep 15, 2008 7:27 pm
My Bike: zxr400

Re: engine wont start -please help

Post by raul »

right i got as far as u said above but not sure what needs bending ;is that the bit above the relay coil witch moves up and down like a spring tipe?
raul
Posts: 90
Joined: Mon Sep 15, 2008 7:27 pm
My Bike: zxr400

Re: engine wont start -please help

Post by raul »

OK now i get a click from the solenoid(behind the battery) everytime i put the ignition on , assume that's working, but nothing on the fuse box relay, i also left the battery(2months old) on optimax and is all good ,

dam electrics
Post Reply