Hey all,
Just aquired a trio of L model ZXR's, and this came up as the number 1 forum for them. I've been into 400s since late 2009 when I bought an NC23, then an NC30 (sadly written off in October 2011) an NC35 appeared in 2013 which took a year to get roadworthy. When I took the '35 in for MOT I was fed the idea of buying an ex Bemsee F400 ZXR plus a road bike and all the spares they had.
Race bike is fairly well specced, MCT worked forks, Öhlins shock, Promach rearsets, small fuel cell, ram air, Brembo 19x20 m/c, BEET stainless system with MHP can and Öhlins SD121 steering damper that I can remember off the top of my head!
Got a good road bike plus 5 engines, 2 frames, 3 sets of wheels and discs, a box of 30 or so rear sprockets, a couple of odd SP bits etc basically half a 20ft shipping container full!
Will try and get pics tomorrow
Hi everybody
Moderator: Moderators
-
- Posts: 14
- Joined: Sat Jan 03, 2015 8:31 am
- My Bike: Yamaha R1
-
- Posts: 197
- Joined: Fri Jan 25, 2013 12:33 pm
- My Bike: CBR600RR, ZXR400 L-2
- Location: Waterlooville, Hampshire
Hi everybody
You lucky guy! Make sure you take loads of pics and start a build thread on the forum!
-
- zxr400 oc member
- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Hi everybody
Sounds like fun.. Looking forward to the build pictures as you untangle the parts jigsaw
We are we're we are..
-
- Posts: 14
- Joined: Sat Jan 03, 2015 8:31 am
- My Bike: Yamaha R1
Re: Hi everybody
Will do guys allegedly 2 engines are stock, one has a lightened and balanced bottom end with stock top and one has the same but with a ported and polished head and .5mm oversize pistons. The one in the black bike is that except running +1mm pistons.
Will aim to get the road one sorted first, really all it needs is indicators, fairing screws exhaust strap and a new screen (after a clear double bubble)
Fuel cell (uses a fibreglass dummy cover)
Spare engines
Spare frames, Micron pipes and more spares
Will aim to get the road one sorted first, really all it needs is indicators, fairing screws exhaust strap and a new screen (after a clear double bubble)
Fuel cell (uses a fibreglass dummy cover)
Spare engines
Spare frames, Micron pipes and more spares
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Hi everybody
A certain someone approves of this thread.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::