Bit of an electrical and electronic
Previously inactive member -now active!
Moderator: Moderators
-
robel
- Posts: 4
- Joined: Sun May 11, 2014 11:06 am
- My Bike: ZXR400 L's & H. TZR250
- Location: Maidenhead, Berks. UK
Previously inactive member -now active!
Self employed in a few different areas so never had enough time but easing off so hope to be an active member. Two years ago built a GSXR 400 for my daughter to race with BEMSEE. Sold it early in 2015 to buy a ZXR400 l. This year she has been getting the feel of it and spending money - situation normal. I've been doing small mods like small Aprilia caliper mounted on swinging arm for rear brake. Gets rid of that lump of metal hanging on the axle and the torsion arm.
Bit of an electrical and electronic
so going to do a DIY quick shifter based on a pressure sensitive resistor and an Arduino module. I also race wire the bikes. Will be building up an H for myself to sprint - probably push the engine till I blow it up!
Bit of an electrical and electronic
You do not have the required permissions to view the files attached to this post.
- Miles
- zxr400 oc member

- Posts: 505
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: Previously inactive member -now active!
There's quite a good racing community here so any issues in sure they can help. Bike looks well.
Welcome to the party pal
Welcome to the party pal
-
Top-shaggy
- zxr400 oc member

- Posts: 128
- Joined: Sat Aug 30, 2014 12:03 am
- My Bike: KR-1R
- Location: NE Derbyshire
Re: Previously inactive member -now active!
Good to have you back and looking forward to seeing some pics of the mods and racing the bikes 
We are we're we are..