just got this new project

One for you newbies to introduce yourselves and show us your ZXR!

Moderator: Moderators

WelshD1K
zxr400 oc member
zxr400 oc member
Posts: 284
Joined: Sun Mar 09, 2008 9:46 pm

Re: just got this new project

Post by WelshD1K »

zimm wrote:sorry mate ..

calipers are totally interchangeable..

H discs are smaller though... what you cant swap is discs/forks as the caliper mounts on the fork bottoms are positioned such that the caliper is in the correct place for the discs intended for use with the forks.
hmmz cant be a an l caliper that came in the box of spares then my bad.
master
Posts: 15
Joined: Fri Dec 18, 2009 7:27 pm
My Bike: ninja250r

Re: just got this new project

Post by master »

hi mate
User avatar
zxr400rider
zxr400 oc member
zxr400 oc member
Posts: 59
Joined: Mon Nov 30, 2009 8:14 pm
My Bike: zxr400 h1
Location: swindon

Re: just got this new project

Post by zxr400rider »

got my new loom yesterday fitted it today but had same trouble, the loom came with just the white bit for the ignition barrel so tried that bit turn it 2clicks get no lights but starts, turn it again with lights but get no start button, plug my switch with keys in get lights but doesnt start so back to back to square one. the white bit has 5 wires and no brown wire loose mine has 6 with a brown wire loose that plugs into the loom puzzled !!! :ffs
ZXR400 H1 gsxr600 srad rear shock, h2 front forks, delkevic downpipes, art end can,110 mainjets, braided brake lines, L model single seat, led rear light and LOTS of fun
Post Reply